|Description||Part Number||Speed (Mbit/s)|
|1.0/2.3 Krone IDC Balun|
KATT IDC connector
The KATT IDC connector is compatible with Krone and ATT 110 punch down tooling.
Designed for terminating 24-22 AWG (0.5 - 0.65 mm) diameter wire. Please contact us for other wire sizes.
|2-8 Mbit/s||2-8-34 Mbit/s||34-155 Mbit/s|
|Impedance||75 ohm / 120 ohm||75 ohm / 120 ohm||75 ohm / 120 ohm|
|Insertion Loss||Max. 0.2dB at 2Mbit/s, 0.3dB at 8Mbit/s||Max. 0.3dB (8Mbit/s); Max 0.9dB from 0.2 to 70MHz||Max. 0.8dB from 860KHz to 52MHz max. 1.5dB from 50KHz to 240MHz|
|Return Loss||-29dB at 2Mbit/s, -21dB at 8Mbit/s||-21dB (8Mbit/s); -15dB from 1 to 70MHz||Max. 15dB from 1MHz to 240MHz|
|Crosstalk||Better than 80dB from 0.1MHz to 12MHz||Better than -60dB from 1MHz to 70MHz||-80dB from 1MHz to 240MHz|