The Splitter Panel accepts 96 Physical bearers, e.g. from a Tekmos 96 Channel Balun Panel, and presents 16 bearers on each of the "A" and "B" connectors. The last Splitter Panel in the chain has 130 ohm terminating resistors on the "B" connector, this Splitter must be located within 1 metre of the final acceSS7 Cardcage. Connectors are female 50 Way Amp, standard 120 ohm Cables are available for connection to acceSS7 Cardcages or additional Splitter Panels.
This panel is suitable for installations where the network access points will be daisy-chained to more than one acceSS7 Cardcage and the Cardcage contains 4 or more Cards. In similar circumstances with 4 or fewer Cards the Single Port Splitter Module is recommended.