Tekmos Communications logo

phone icon
+44 (0)1624 818275
  • Home Icon link to Home Page
  • Baluns and Balun Panels
  • Through Coupler Panels
  • Connectors
  • Cables
  • Bespoke
  • Contact
  • About Us
  • FAQs
  • Home >
  • OEM >
  • JDSU >
  • 96 Bearer Balun Panel

96 Bearer Balun Panel - Coax to Telco
JDSU

[Photo of 96 Bearer (48 Link) Balun Panel
  • 96 Bearers
  • 96 Coax
    • Type 43
    • 1.6/5.6
  • 6 Telco on integrated cables
    • 16E1 per telco
  • G703 and G704 compliant
  • E1 & T1
  • No power required
  • 19 inch rack mount 4U
[Photo of 96 Bearer Balun Panel]

The 96 Bearer Balun Panel provides signal conversion, impedance matching and isolation protection between 96 unbalanced (75 ohm coax) network bearers and the JDSU SS7 system.

Available with Type 43 (SMZ) or 1.6/5.6 (Small Siemens) coax connectors on the network interface and 50 way male telco connectors on 440mm of shielded twisted pair cable for connection to the SS7 Cardcage, Concentrator Unit or Multi-Port Splitter Panel.

Also available as a PCB panel.

Part Number JDSU Part NumberDescription
TK-UBP01-048-TOOE7569-60001Balun Panel 96 Bearer T43 to Telco tails
TK-UBP02-048-TOOE7569-60002Balun Panel 96 Bearer 1.6/5.6 to Telco tails
Specifications
Coax Connector (75 ohm)96 x Type 43(M) or 1.6/5.6(F)
Twisted Pair Connector (120 ohm)6 x Telco Male 50 way on 440mm cable tails
Transmission LineITU-T G.703 or G.704 (transparent)
Speed2.048Mbit/s (E1) and 8.448Mbit/s (E2)
Wiring SchemeJDSU Technologies, acceSS7™
Cross TalkBetter than -50dB at 1 to 10Mhz
Insertion LossLess than 0.35dB
Return LossBetter than 25dB
Power RequirementsNone
Operating Temperature-40°C to 85°C
MTBF30 years
Dimensions (WxHxD)482 x 176 x 50mm ex. cable tails
Weight4.6Kg
ConformanceRoHS, CE
Harmonisation Code8544-421000

© Tekmos Communications Limited 2019. All rights reserved.

This website uses cookies to track your visit. You should disable cookies in your browser if you do not want your visit tracked.

Terms