16 Bearer Balun Panel - Coax to Telco
Agilent acceSS7™

16 Bearers
16 x coax to 1 x Telco
- Type 43 to Telco
- 1.6/5.6 to Telco
75 - 120 ohm conversion
Coax - Twisted Pair
G703 and G704 Compliant
E1 (2Mbit/s) and E2 (8Mbit/s)
One panel per acceSS7™ Interface Card

Designed for Agilent Technologies acceSS7 system, the Tekmos 16 Bearer Balun Panel provides impedance matching and isolation protection for 16 coax channels and one card in the Agilent acceSS7 Cardcage. Available with 75 ohm Type 43 (BT) or 1.6/5.6 (Small Siemens) coax connectors on the Network Interface and a 120 ohm 50 way female Telco (Amp Champ) connector on the acceSS7 Interface.

Shielded twisted pair cables are available for connection between the balun panel and the acceSS7 Cardcage, Concentrator Unit, or Splitter Units.

Use one panel per acceSS7 Interface Card. For a fully populated acceSS7 Cardcage, the 96 Channel PCB Balun Panel is the recommended solution.

Part Number	Description
TK-UBP01-008-TOO	Balun Panel 16 Channel Type 43
TK-UBP02-008-TOO	Balun Panel 16 Channel 1.6/5.6

Specifications
75 ohm Connections	16 x Type 43(F) or 1.6/5.6(M)
120 ohm Connections	1 x Telco Female Shielded 50 way
Transmission Line	ITU-T G.703 or G.704 (transparent)
Speed	2.048Mbit/s (E1) and 8.448Mbit/s (E2)
Cross Talk	Better than -50dB at 1 to 10Mhz
Insertion Loss	Less than 2dB
Return Loss	Better than 18dB
Dimensions (WxHxD)	482 x 44 x 26 mm
Wiring Scheme	Agilent Technologies, acceSS7™
Materials	Front Plate - Tufnol, Case - Mild Steel, Black Powder Coat
MTBF	Estimated 30 Years
Operating Temperature	0° to 50° C
Power Requirements	None
Conformance	RoHS, CE
Harmonisation Code	8544–421000

16 Bearer Balun Panel - Coax to TelcoAgilent acceSS7™

16 Bearer Balun Panel - Coax to Telco
Agilent acceSS7™