16 Bearer Balun Panel - Coax to Telco
JDSU

16 Bearers
16 x coax to 1 x Telco
- Type 43 to Telco
- 1.6/5.6 to Telco
75 - 120 ohm conversion
Coax - Twisted Pair
G703 and G704 Compliant
E1 (2Mbit/s) and E2 (8Mbit/s)
One panel per acceSS7™ Interface Card

The Tekmos 16 Bearer Balun Panel provides impedance matching and isolation protection for the conversion of 16 E1/T1 coax channels to 16 balanced bearers. Coax connectors can be specified as Type 43 (BT) or 1.6/5.6 (Small Siemens). The 16 balanced bearers are output on a 50 way female Telco connector.

Coax cables are available to connect from the netwrok to the Bearer Balun Panel. Shielded twisted pair cables are available for connection between the balun panel and the acceSS7 Cardcage, Concentrator Unit or Splitter Unit as required.

Use one panel per acceSS7 Interface Card (16 E1/T1).

Please contact us to discuss alternative solutions if you have a different system configuration

Part Number	Description
TK-UBP01-008-TOO	Balun Panel 16 Channel Type 43
TK-UBP02-008-TOO	Balun Panel 16 Channel 1.6/5.6

Specifications
75 ohm Connections	16 x Type 43(F) or 1.6/5.6(M)
120 ohm Connections	1 x Telco Female Shielded 50 way
Transmission Line	ITU-T G.703 or G.704 (transparent)
Speed	2.048Mbit/s (E1) and 8.448Mbit/s (E2)
Cross Talk	Better than -50dB at 1 to 10Mhz
Insertion Loss	Less than 2dB
Return Loss	Better than 18dB
Dimensions (WxHxD)	482 x 44 x 26 mm
Wiring Scheme	JDSU Technologies, acceSS7™
Materials	Front Plate - Tufnol, Case - Mild Steel, Black Powder Coat
MTBF	Estimated 30 Years
Operating Temperature	0° to 50° C
Power Requirements	None
Conformance	RoHS, CE
Harmonisation Code	8544–421000

16 Bearer Balun Panel - Coax to TelcoJDSU

16 Bearer Balun Panel - Coax to Telco
JDSU