Description
Provides a practical and robust method of daisy chaining SS7 links to up to seven AcceSS7^TM Cardcages. The Splitter - Multiplexing Panel takes the input bearers and presents them on the eight output connectors for onward connection. The last connector should have a terminating plug fitted, 120 ohm for the High Speed Interface Card, or, 133 ohm for the Low Speed Interface Card. Connectors are shielded female 50 Way Amp, standard 120 ohm cables are available for connection to AcceSS7^TM Cardcages or additional Splitter Panels.

Features and Benefits
Standard 19" rack modular design, 2U (3.5-inch) height and 25mm deep. The Splitter is transparent to all data protocols and software. A passive unit which does not require power.

Installation Guidlines
These Panels are suitable for installations where the network access points will be daisy-chained to more than one AcceSS7^TM Cardcage. In similar circumstances with fewer circuits the Tekmos Single Port Splitter Unit would be more suitable.